Funky Wet Fibers

Author Image

By: TOM BRANNA

Editor

Funky Wet Fibers
Ingredients
%

Phase A

  • Deionized water
  • 46.53
  • Carbopol Ultrez 21 Polymer (Acrylates/C10-30 alkyl acrylate crosspolymer)
  • 0.30
  • AMP-Ultra PC 2000 (95%) (Aminomethyl propanol)
  • 0.03

Phase B

  • Fixate Superhold Polymer (Polyacrylate-2 crosspolymer 30%)
  • 15.68
  • Schercemol DISF Ester (Diisostearyl fumarate)
  • 1.00
  • Ethanol (Alcohol Denat.)
  • 3.00
  • Glydant Plus Liquid (DMDM Hydantoin (and) Iodopropynyl butylcarbamate)
  • 0.40
  • AMP-Ultra PC 2000 (95%) (Aminomethyl propanol)
  • 2.06

Phase C

  • Propylene glycol
  • 5.00
  • RITA PEO-18 (or) Polyox WSR-301 (PEG-90M)
  • 0.30
  • Deionized water
  • 20.00

Phase D

  • F D & C Yellow No. 6
  • 3.50
  • D & C Red No. 33
  • 2.20

Procedure

Sprinkle Carbopol Ultrez 21 polymer on the surface of deionized water and allow to wet. Begin gentle mixing. Partially neutralize Carbopol polymer dispersion with AMP-Ultra PC 2000. Mix until uniform. Add Phase B ingredients one at a time in order to the batch with mixing. Adjust pH to 6.8—7.2 with AMP-Ultra PC 2000. Prepare phase C: mix glycol and water. Add slowly PEG-90M to the mix with strong agitation and slight heating, until homogenous. Add phase C to the batch with mixing. Add dyes. Mix until uniform.

More Information

Noveon Personal Care 9911 Brecksville Road, Cleveland, OH 44141
Tel: (216) 447-5000; Fax: (216) 447-5250 Website: www.noveon.com